Arduino Spot Welder

Bestseller No. 1
Spot Welder Control,Spot Welder Time Control Module Digital Display Controller Board(100A)
  • You can save the last operation, monopulse triggers this module.
  • Voltage compensation: According to the local voltage change, automatically adjust the compensation output, and displays local voltage and compensation value for about 1 second while triggering.
  • 0-999 welding count function: The number of weldings is clear at a glance. Press and hold the encoder for 3 seconds to clear the count bit.
  • Time input 0-99 cycle (1 cycle is 20ms), adjustable welding strength 30%-99%.
  • 9-12V AC power input, need to use AC transformer.
Bestseller No. 2
Ginode 2M 0.15 x 8 mm Pure Nickel Strip for 18650 Battery Welding Spot 2 M Pure Ni Plate Welding Strip Tape (0.15 x 8 mm(2M))
  • Perfect for spot welding 18650 cells.
  • 2M 0.15 x 8 mm Pure Ni Plate Nickel Welding Strip Tape.
  • Good weldability, high draw tension, easy to operate.
  • Good properties and electrical conductivity on the tin.
  • Wide application - Manufacture nickel-metal hydride batteries, lithium batteries, combination battery and power tools newsletter, special lamps and other industries.
Bestseller No. 3
Acxico 1Pcs Spot Welder Machine Time Control Board Current Digital Display DIY Controller Board 40A
  • The use of STM8 industrial control center microcontroller.Strong and weak electricity through optocoupler insulation, safe operation.
  • The power line and foot switch line adopts the bolt the quick connect terminal, more convenient and reliable.Input time, current using high-precision simple potentiometer, to ensure reliable, convenient input.
  • On-board power supply, state, foot, trigger indicator, work status clearly visible.The design of reliable zero crossing detection circuit to ensure that the SCR phase shift accuracy.
  • Digital control interface, you can display the current time and current settings.Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%).
  • The controller is compatible with 40A scr.The package contains the control panel, display panel, cable matching, red green button.
Bestseller No. 4
DIY Spot Welder 25 Square Spot Welding Pen with DT for Battery Pack Spot Welder (DT25)
  • is Pure Copper Spot Welder Pen,So Pls dont worry the Quality ,When u buy it u will got 1Set Spot Welding pen with DT ,and 2pcs Needle.
  • 2.Spot Wedling Needle is Cooper Oxide ,When u finish the top of needle ,U can shape it again .
  • 3.The Copper Pen Length is 11cm,and it is also Pure Copper.
  • 4.Spot welding Wire Length is 50cm .Pure Copper too.and it good for battery Spot Welder .
  • 5.DT is Pure Copper.and We made the 25square Spot Welding Pen with DT are all Hand-Made.if u have more good advices for the spot welding pen ,Pls feel free to let me know ,our company will try best to offer the best goods for u .
Bestseller No. 5
YWBL-WH Spot Welder Module Time Control Module Digital Display Controller Board 9-12V AC power input(100A)
  • Supply voltage: 9-12V AC(need to use AC transformer)
  • Bidirectional thyristor: 40A, 100A (Optional)
  • Time input 0-99 cycle (1 cycle is 20ms), adjustable welding strength 30%-99%.
  • 0-999 welding count function: The number of weldings is clear at a glance.
  • The main board and the display operation panel are separated, and the outer casing can be flexibly assembled.
Bestseller No. 6
Stark Professional Portable Electric 240 Volt Spot Welder Machine Welding Systems DIY Welding Tips with Handle
  • Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld
  • Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness
  • Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one
  • Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever
  • Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly
Bestseller No. 7
Welding Soldering Iron with Thermostatic Digital-Controlled and LCD Screen Display, 60 W Temperature Adjustable 180℃/356℉-480℃/896℉ with 5 PCS Soldering Bits, 2 Soldering Iron Stands & 1 Sponge
  • CLEAR LCD SCREEN DISPLAY: A high-definition LCD screen display, which indicates the temperature status more clearly. Two temperature units showed on screen, the degrees Celcius and degree Fahrenheit.
  • ADJUSTABLE TEMPERATURE:The temperature of this soldering iron can be adjusted from 180℃/356℉ to 480℃/896℉. As a result, it can regulate the temperature in a more accurate and effective way.
  • HEATING-UP FAST: With a high power of 60 W, It can be heated up quickly and due to this fast heat-up ceramic core, it can be heated to the temperature that is already set within a short period of time
  • DURABLE IN USE: This type of soldering iron is made from some metal alloys, which is oxidation resisting and it won’t rust easily while immersing in water. so it can be used for a long-term period.
  • PACKAGE INCLUDING: 1* Soldering Iron; 5 * Replaceable Soldering Bits; 2 * Soldering Iron Stands and 1 * Sponge. It almost involves everything you need for pyrography.
Bestseller No. 8
Timer Relay, DROK Time Delay Relay DC 5V 12V 24V Delay Controller Board Delay-off Cycle Timer 0.01s-9999mins Trigger Delay Switching Relay Module with LCD Display Support Micro USB 5V Power Supply
  • DROK timer relay operating voltage range is DC 6-30V, support micro USB 5.0 V power supply; support high level trigger 3.0v-24v and low level trigger 0v-0.2v; timing range is 0.01s~9999mins, can be continuously adjustable.
Bestseller No. 9
Reboot MIG Welder Flux Core 220V MIG160 Digital Gas/Gasless Inverter MIG/Stick/Lift TIG Welder Supports 2LB/10LB Flux Core/Solid Wire MIG Lift Tig Welding Machine EASY OPERATION
  • This digital mig160 welder supports 2lbs/10lbs flux cored wire most perfectly to do the carbon steel welding without gas.rated duty cycle : 60% at 160a and 100% at 120a.Just select the correct parameters instead of setting from the panel. 【30A breaker suggested】
  • Using gas with 2lbs/10lbs solid welding wires .030"-.035”(0.8/1.0 mm )to weld .030"above thickness workpiece.Multi-mode of mig/mma/lift tig,just select the mode you need on the panel.(tig torch is not included,find it in our store,named wp17fv)
  • Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
  • Lift tig mode(not HF tig) is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
  • Buy with confidence as reboot offer 30-day 100% satisfaction or money back guarantee and 1-year limited warranty,there is a warranty card comes together in the package,please email us through that to get the consumables.Click on the add to cart button now!
SaleBestseller No. 10
Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering
  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function; 5-160A comfortably welds thin stainless steel and other various metals.
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs.
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length.
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection.
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level; the strength of its components makes it a reliable work tool for professionals or individuals. Package includes 7 feet of power cord, 10 feet of 300-Amp electrode holder assembly, 10 feet of 300-Amp grounding clamp assembly, and a 230V to 115V power adapter.

Compare The Top 10 Arduino Spot Welder

Arduino Spot Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to gets small percentage of comission from Amazon if you purchase from page