Arduino Spot Welder Kit

Bestseller No. 1
Spot Welder Control,Spot Welder Time Control Module Digital Display Controller Board(100A)
  • You can save the last operation, monopulse triggers this module.
  • Voltage compensation: According to the local voltage change, automatically adjust the compensation output, and displays local voltage and compensation value for about 1 second while triggering.
  • 0-999 welding count function: The number of weldings is clear at a glance. Press and hold the encoder for 3 seconds to clear the count bit.
  • Time input 0-99 cycle (1 cycle is 20ms), adjustable welding strength 30%-99%.
  • 9-12V AC power input, need to use AC transformer.
SaleBestseller No. 2
Acxico 1Pcs Spot Welder Machine Time Control Board Current Digital Display DIY Controller Board 40A
  • The use of STM8 industrial control center microcontroller.Strong and weak electricity through optocoupler insulation, safe operation.
  • The power line and foot switch line adopts the bolt the quick connect terminal, more convenient and reliable.Input time, current using high-precision simple potentiometer, to ensure reliable, convenient input.
  • On-board power supply, state, foot, trigger indicator, work status clearly visible.The design of reliable zero crossing detection circuit to ensure that the SCR phase shift accuracy.
  • Digital control interface, you can display the current time and current settings.Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%).
  • The controller is compatible with 40A scr.The package contains the control panel, display panel, cable matching, red green button.
Bestseller No. 3
LICHIFIT Portable Battery Nickel Sheet Spot Welder Set PCB Circuit Board 3.7-4.2V 4.5ah Battery Spot Welding Machine Pen
  • Equipped with a 3.7-4.2V 4.5ah power lithium battery with a discharge rate of 100C and a load capacity of about 400A.
  • Comes with a charging control module, which charges the battery through the micro USB port, and is charged with hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.15mm.
  • Length of welding pen: 10 cm
  • Length of 10AWG line: 26 cm
  • It is recommend to install the product by the people who have basic electrical knowledge and hands-on ability.(Please differentiate the negative and positive electrode when you connect, you can check the pictures on this detail page)
Bestseller No. 4
DIY Spot Welder 25 Square Spot Welding Pen with DT for Battery Pack Spot Welder (DT25)
  • 1.it is Pure Copper Spot Welder Pen,So Pls dont worry the Quality ,When u buy it u will got 1Set Spot Welding pen with DT ,and 2pcs Needle.
  • 2.Spot Wedling Needle is Cooper Oxide ,When u finish the top of needle ,U can shape it again .
  • 3.The Copper Pen Length is 11cm,and it is also Pure Copper.
  • 4.Spot welding Wire Length is 50cm .Pure Copper too.and it good for battery Spot Welder .
  • 5.DT is Pure Copper.and We made the 25square Spot Welding Pen with DT are all Hand-Made.if u have more good advices for the spot welding pen ,Pls feel free to let me know ,our company will try best to offer the best goods for u .
Bestseller No. 5
Goodqueen Spot Welder Time Control Board 100A Updating Current Controller with Digital Display
  • The joint can withstand large static and vibration load,can be used to weld many materials.
  • The connector provides a secure connection.
  • Ideal accessories for high temperature working.
  • Perfect match for your welding gun.
  • Made of high quality material, durable and resistant to aging.
Bestseller No. 6
Bespick Spot Welding Machine 4.3KW Spot Welder with Pen Automatic Pulse Welder for 18650 14500 Lithium Battery Welding 0.15-0.35mm Nickel Strip with LED Lighting and Foot Pedal Control
  • 【POWERFUL】Enhanced output current structure: this spot welding machine is designed with enhanced output curremt structure which can enhance welding effect. And output power is1.3 to 1.5 times than the original power. The 144 square plating alloy output welding arm can affect the welding effect.
  • 【INTELLIGNT DESIGN】LED lighting and foot pedal control: this spot welding machine is equipped with LED lighting to light the welding operation. It is an ideal choice for you to do welding operation in low luminance environment.And the spot weld machine is designed with a convenient foot pedal control. It is very easy for you to control the line. Also with the sense setting pulse and Fast flash welding.
  • 【Portable Design & Wide Applications】Our welding machine is perfect for welding normal thin steel and iron, it is extremely versatile and perfect for the welder who wants to work on auto body, household repairs, or even heavier farm projects requiring extra power, DIY charging treasure, small windmill, small electric light and general repairing work. Features a easy carrying handle, compact design, easy for translation and storage.
  • 【3 METHODS】You can use this battery spot welding machine kits with 3 modes. 1: You can build your battery pack with the fixed welding head and foot pedal. In this welding mode, you need to adjust the pressure adjustor to make the spots more reliable and elegant. 2: You can build your battery pack with the mobile welding pen with foot pedal, which effectively extends your welding area. 3: You can build your battery pack with mobile welding pen without foot pedal.
  • 【FUNCTION】Our spot machine is specifically designed for 18650, 14500 battery welding and any other lithium batteries, and can be used to weld nickel strips. Also, the welder has welding calibration control: the welding calibration control of the wire automatic welding machine, which can make your welding more precise and the spot welding more fast.
Bestseller No. 7
Mophorn 709AD Pulse Spot Welder 0.3mm Battery Welding Machine 110V Battery Spot Welder & Soldering Station Portable Pulse Welding Machine For Battery Pack 18650 14500 & other Lithium Batteries
  • 【FIXED WELDING FUNCTION】- Fixed welding tips have LED light function for precise fixed welding. Soldering six, three rows batteries, or a single battery with high precision. Also providing a quick battery welding.
  • 【PORTABLE 2 IN 1 WELDING PEN】- Convenient hand-held, double-click welding needle balance spring pressure, more balanced solder joints. Avoid flashover welding, make one-hand operation possible, adjustable solder joint distance.
  • 【PULSE DISPLAY】- It shows pulse quantity when you are at work with this machine. The distinct panel also allows you to set pulse you want easily and quickly. The operation will be more fluent.
  • 【ADDITIONAL ACCESSORY】- Additional 1Kg Nickel Plated Steel Strip is included in the whole complete accessory kit.
  • 【WIDE APPLICATION】- Suits for various sizes of battery pack, button battery, polymer battery and protection board, Apple mobile phone camera, stainless steel hardware, stainless steel mesh, etc.
Bestseller No. 8
Anbes Soldering Iron Kit Electronics, 60W Adjustable Temperature Welding Tool, 5pcs Soldering Tips, Desoldering Pump, Soldering Iron Stand, Tweezers
  • Soldering Iron Support Station: Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damaged.
  • Soldering Iron Unique Features: Superior professional soldering iron has 5 multiple tips replacement, Heat and impact resistant design of screw thread so the iron head is not easy to drop.Adjustable Temperature from 200℃-450℃.Heat up fast and work great.
  • Solder Sucker Desoldering Pump: Rugged metal construction,the desoldering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use, best for removing solder from PCB through hole solder joints.
  • Widely Used & Carry Portable: Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag.
  • 14-In-1 Soldering Kit: Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, tin wire tube, soldering iron stand, tweezers, wire stripper cutter, 2 electronic wire.
Bestseller No. 9
DIY Mini Spot Welder Machine, 18650 Battery Various Welding Power Supplies for Super Capcitor
  • Wide selection of welding power supply: lithium battery power supply or 12V car battery.The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
  • With LCD display screen, can display welding parameters.The welding pen and the input line are connected by U-shaped cold-pressed terminals, which is convenient for disassembly and replacement.
  • Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.The power board uses 2 Gusi copper to increase the overcurrent capacity.
  • using 5 300A MOS tubes, non-disassembled MOS tubes.The MOS tube driver adopts the imported special chip driver. The fastest MOS tube can be hit with 20nS. The switch is fast to prevent the explosion of the tube and the non-triode push-pull drive.
  • The MOS drive design adds a transient diode to protect the MOS and prevent the explosion of the tube.10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the overcurrent capacity.The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.12mm.
Bestseller No. 10
Anbes Soldering Iron Kit, [Upgraded] 60W Adjustable Temperature Welding Tool with ON-OFF Switch, 8-in-1 Screwdrivers, 2pcs Soldering Iron Tips, Solder Sucker, Wire Cutter,Tweezers,Soldering Iron Stand
  • Soldering Iron with ON-OFF Switch: The soldering iron set with on-off switch, it is convenience for you to turn it off anytime if you don't need to use it. At the same time, it can avoid long hours of work, saving energy and ensuring safe welding.
  • Adjustable Temperature & Heat UP Quickly: The 60W soldering iron heat up very quickly with a ceramic tube and the adjustable temperature welding tools can adjust the temperature between 200℃ - 450℃(392℉ - 842℉).
  • Wire Cutter with Anti-Slip Handle: A wire cutter with the anti-slip handle, it can provide a comfortable feeling when you use it. Easier to operate than wire stripper cutter and comfortable. You can easy to cut the wire and strip the wire insulation material and don't need to rotate the cable.
  • 8 in 1 Multifunctional Screwdriver: A screwdriver with 8 replaceable magnetic bits, and the magnetic base can suck screws tightly, loosing and fixing various screws easily.
  • Widely Used & Portable Carry: The soldering iron kit is great for home DIY, welding circuit board and electric repair. The PU carry Bag with a fashionable design and you can store all the soldering iron tools, you can take it anywhere.

Compare The Top 10 Arduino Spot Welder Kit

Arduino Spot Welder Kit is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page