Amico Multiprocess Welder

Bestseller No. 1
MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding New
  • MTS-205 capable of welding up to 1/2" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 2
Forney Easy Weld 140 MP, Multi-Process Welder
  • MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and DC TIG Welder (Accessories for TIG Welding not included) everything you need in one machine
  • EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly
  • CONTROL YOUR WELD- Infinite voltage and wire feed speed controls allows you to dial in the perfect weld. Rated output voltage range- 12 - 23V. Rated output current range- 43 - 110A. Full output curren range- 10 - 140A
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire. Full metal wire drive assembly
  • WELDER INCLUDES- 10' MIG gun, 8' electrode holder, 8' ground clamp, Integrated handle with torch wrap, 20A - 15A adapter and one additional .030" contact tip. Backed by a 12-month warranty
Bestseller No. 3
Amico TIG-160DC, 160 Amp TIG-Torch ARC Stick DC Welder 110/230V Dual Voltage Welding Machine New
  • Powerful welder capable of welding up to 3/8" Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome.
  • The full-size TIG & Stick platform, outperforming the competition on arc quality, voltage control, duty cycle and value.
  • This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
  • Dual Voltage Input (110V/230V) means you can plug into any common power supply.
  • TIG torch & cable 13ft, Electrode holder & cable 300A /10ft, Work clamp & cable 300A /10ft.
Bestseller No. 4
AMICO CTS-200A, 50 Amp Plasma Cutter, 200 Amp HF-TIG, 200 Amp Stick Arc DC Inverter Welder, 3-in-1 Multifunction Welding Machine
  • Combo 3-in-1 multifunction Plasma Cutter/TIG Torch/Stick Arc professional welding machine.
  • Advanced IGBT technology, synergic controlled, very easy and simple operation.
  • Featured wave-form control system: perfect wave form of volts and amps during, short circuits and Arc burning cycles.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection.
  • Automatic temperature control, fan dormancy, steeples amperage control, all generators friendly.
Bestseller No. 5
CTS-160, 160A TIG-Torch, 140A Stick Arc Welder & 30A Plasma Cutter 3-in-1 Combo Welding
  • Combo 3-in-1 multifunction Plasma Cutter/TIG Torch/Stick Arc professional welding machine.
  • Advanced IGBT technology, synergic controlled, very easy and simple operation.
  • Featured wave-form control system: perfect wave form of volts and amps during, short circuits and Arc burning cycles.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection.
  • Automatic temperature control, fan dormancy, steeples amperage control, all generators friendly.
Bestseller No. 6
Amico TIG-205HF, 205 Amp TIG Torch Stick Arc DC Inverter Welder, High Frequency & High Voltage 100% Start, 95~260V Wide Voltage Welding Machine.
  • TIG-205HF integrates advanced MOSFET inverter technology, allowing excellent arc stability and the most beautiful welds. Whether the material is stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, etc., the welding effect is absolutely ideal; the machine can be swiftly operated and can efficiently finish any tasks from home repairs or professional use. The new lightweight model design gives the machine an elegant structure and makes the machine very easy to carry.
  • TIG-205HF is a professional Argon arc welding machine with outstanding performance and a robust and elegant structure. This is an industrial level machine – high-frequency and high-voltage arcs are easy to start and ensure 100% perfection. The current of 10-205 amperes is very suitable for welding all types of thicknesses regarding work-pieces. The outstanding 80% duty cycle can also ensure long-time welding.
  • TIG-205HF is an intelligent power supply system built with a sleek and modern design. The automatic selection function can automatically detect the input voltage and will adjust to the suitable conditions on its own. Additionally, you can easily manually adjust it in the range of 95V to 260V for specific requests. This machine is designed for demanding industrial work and construction, including simple tasks and chores around the house.
  • Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. At that extreme length, the machine can still work perfectly and flawlessly, ensuring that the work is efficiently completed. It is extremely suitable for difficult operations on construction sites, agricultural sites, relatively remote areas, and even suitable for simple tasks around the house or workshop.
  • TIG-205HF has a variety of safety protection functions, such as automatic voltage fluctuation compensation, over-heating protection, over-current protection, over-load protection, TIG torch gun safety protection, solenoid valve gas control, etc. The fan has an automatic temperature control function, which can make the machine run very quietly.
Bestseller No. 7
MTS-165, 165-Amp MIG/TIG-Torch/Stick Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding
  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 8
Amico MTS-185, 185 Amp MIG Wire Feed/Flux Core/TIG Torch/Stick Arc Welder, Weld Aluminum with 2T/4T 110/230V Welding
  • MTS-185 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 3/8" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 9
MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding
  • MTS-205 capable of welding up to 1/2" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 10
CTS-200, 50A Plasma Cutter, 200A TIG-Torch & Stick Arc Welder, 3-in-1 Combo Cutting & Welding Machine
  • CTS-200 is the perfect choice for projects and repairs around the home and auto body shop.
  • Combo 3-in-1 multifunction plasma cutter/TIG Torch/stick arc professional welding machine.
  • Advanced IGBT technology, synergic controlled, very easy and simple operation.
  • Featured wave-form control system: perfect wave form of volts and Amps during, short circuits and arc burning cycles.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection.

Compare The Top 10 Amico Multiprocess Welder

Amico Multiprocess Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page