Amico 205 Welder

Bestseller No. 1
AMICO POWER XYST20502018 ST-205 Amp Lift-TIG Torch/Stick/Arc Welder, Red
  • Multifunction: lift-tig/ stick/ arc 2-in-1 welder
  • St-205 is ideal for stick/arc force with lift-tig function. Lift start-easy arc starting and improvers Tungsten life, simple to operate, LCD amperage display
  • Advanced IGBT Inverter technology, excellent arc stability, hot start, anti-sticking, arc force built in, automatic temperature control, fan dormancy, steeples amperage control
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection
  • 115V/230V dual voltage input
Bestseller No. 2
Amico MTS-185, 185 Amp MIG Wire Feed/Flux Core/TIG Torch/Stick Arc Welder, Weld Aluminum with 2T/4T 110/230V Welding
  • MTS-185 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 3/8" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 3
Amico TIG-205 / 200 Amp HF TIG Torch/Stick/Arc Welder 115 & 230V Dual Voltage Welding Machine
  • TIG-205HF integrates advanced MOSFET inverter technology, allowing excellent arc stability and the most beautiful welds. Whether the material is stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, etc., the welding effect is absolutely ideal; the machine can be swiftly operated and can efficiently finish any tasks from home repairs or professional use. The new lightweight model design gives the machine an elegant structure and makes the machine very easy to carry.
  • TIG-205HF is a professional Argon arc welding machine with outstanding performance and a robust and elegant structure. This is an industrial level machine – high-frequency and high-voltage arcs are easy to start and ensure 100% perfection. The current of 10-205 amperes is very suitable for welding all types of thicknesses regarding work-pieces. The outstanding 80% duty cycle can also ensure long-time welding.
  • TIG-205HF is an intelligent power supply system built with a sleek and modern design. The automatic selection function can automatically detect the input voltage and will adjust to the suitable conditions on its own. Additionally, you can easily manually adjust it in the range of 95V to 260V for specific requests. This machine is designed for demanding industrial work and construction, including simple tasks and chores around the house.
  • Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. At that extreme length, the machine can still work perfectly and flawlessly, ensuring that the work is efficiently completed. It is extremely suitable for difficult operations on construction sites, agricultural sites, relatively remote areas, and even suitable for simple tasks around the house or workshop.
  • TIG-205HF has a variety of safety protection functions, such as automatic voltage fluctuation compensation, over-heating protection, over-current protection, over-load protection, TIG torch gun safety protection, solenoid valve gas control, etc. The fan has an automatic temperature control function, which can make the machine run very quietly.
Bestseller No. 4
MTS-165, 165-Amp MIG/TIG-Torch/Stick Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding
  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 5
MIG155GSV 155 AMP INVERTER MIG/STICK ARC WELDER WITH DUAL VOLTAGE 220V/110V welding machine
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
Bestseller No. 6
Amico TIG-205HF, 205 Amp TIG Torch Stick Arc DC Inverter Welder, High Frequency & High Voltage 100% Start, 95~260V Wide Voltage Welding Machine.
  • TIG-205HF integrates advanced MOSFET inverter technology, allowing excellent arc stability and the most beautiful welds. Whether the material is stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, etc., the welding effect is absolutely ideal; the machine can be swiftly operated and can efficiently finish any tasks from home repairs or professional use. The new lightweight model design gives the machine an elegant structure and makes the machine very easy to carry.
  • TIG-205HF is a professional Argon arc welding machine with outstanding performance and a robust and elegant structure. This is an industrial level machine – high-frequency and high-voltage arcs are easy to start and ensure 100% perfection. The current of 10-205 amperes is very suitable for welding all types of thicknesses regarding work-pieces. The outstanding 80% duty cycle can also ensure long-time welding.
  • TIG-205HF is an intelligent power supply system built with a sleek and modern design. The automatic selection function can automatically detect the input voltage and will adjust to the suitable conditions on its own. Additionally, you can easily manually adjust it in the range of 95V to 260V for specific requests. This machine is designed for demanding industrial work and construction, including simple tasks and chores around the house.
  • Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. At that extreme length, the machine can still work perfectly and flawlessly, ensuring that the work is efficiently completed. It is extremely suitable for difficult operations on construction sites, agricultural sites, relatively remote areas, and even suitable for simple tasks around the house or workshop.
  • TIG-205HF has a variety of safety protection functions, such as automatic voltage fluctuation compensation, over-heating protection, over-current protection, over-load protection, TIG torch gun safety protection, solenoid valve gas control, etc. The fan has an automatic temperature control function, which can make the machine run very quietly.
Bestseller No. 7
Amico TIG-205HF, 205 Amp TIG Torch Stick Arc DC Inverter Welder, High Frequency & High Voltage 100% Start, 95~260V Wide Voltage Welding Machine.
  • TIG-205HF integrates advanced MOSFET inverter technology, allowing excellent arc stability and the most beautiful welds. Whether the material is stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, etc., the welding effect is absolutely ideal; the machine can be swiftly operated and can efficiently finish any tasks from home repairs or professional use. The new lightweight model design gives the machine an elegant structure and makes the machine very easy to carry.
  • TIG-205HF is a professional Argon arc welding machine with outstanding performance and a robust and elegant structure. This is an industrial level machine – high-frequency and high-voltage arcs are easy to start and ensure 100% perfection. The current of 10-205 amperes is very suitable for welding all types of thicknesses regarding work-pieces. The outstanding 80% duty cycle can also ensure long-time welding.
  • TIG-205HF is an intelligent power supply system built with a sleek and modern design. The automatic selection function can automatically detect the input voltage and will adjust to the suitable conditions on its own. Additionally, you can easily manually adjust it in the range of 95V to 260V for specific requests. This machine is designed for demanding industrial work and construction, including simple tasks and chores around the house.
  • Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. At that extreme length, the machine can still work perfectly and flawlessly, ensuring that the work is efficiently completed. It is extremely suitable for difficult operations on construction sites, agricultural sites, relatively remote areas, and even suitable for simple tasks around the house or workshop.
  • TIG-205HF has a variety of safety protection functions, such as automatic voltage fluctuation compensation, over-heating protection, over-current protection, over-load protection, TIG torch gun safety protection, solenoid valve gas control, etc. The fan has an automatic temperature control function, which can make the machine run very quietly.
Bestseller No. 8
LOTOS MIG175 175AMP Mig Welder with Free Spool Gun, Mask, Aluminum Welding Wires, Solid Wires, Argon Regulator, Standard MIG Gun
  • Aluminum Wire Feeder--The durable high quality aluminum wire feeder offers a much more stable and better welding experience.
  • Spool Gun Include-- High-speed MIG spool gun for aluminum welding, 10 feet 4 inches long, 4-prong end connection, 1lb aluminum wire with dia. 0. 9 millimeter included. Can welder 3/16" or thinner aluminum plate.
  • Reliable and Durable-- Its transformer technology has been proven to be reliable and durable.
  • Rated Output--175-amp MIG welder; mild/stainless steel: 18 Gauge – 1/4"; Aluminum: 3/16" or Thinner. Input voltage: 220/240V AC.
  • Multi Use--Welding stainless steel, mild steel, aluminum (with a spool gun, already include in the package, no need to purchase separate) and other metal materials.
Bestseller No. 9
Amico TIG-205HF, 205 Amp TIG Torch Stick Arc DC Inverter Welder, High Frequency & High Voltage 100% Start, 95~260V Wide Voltage Welding Machine.
  • TIG-205HF integrates advanced MOSFET inverter technology, allowing excellent arc stability and the most beautiful welds. Whether the material is stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, etc., the welding effect is absolutely ideal; the machine can be swiftly operated and can efficiently finish any tasks from home repairs or professional use. The new lightweight model design gives the machine an elegant structure and makes the machine very easy to carry.
  • TIG-205HF is a professional Argon arc welding machine with outstanding performance and a robust and elegant structure. This is an industrial level machine – high-frequency and high-voltage arcs are easy to start and ensure 100% perfection. The current of 10-205 amperes is very suitable for welding all types of thicknesses regarding work-pieces. The outstanding 80% duty cycle can also ensure long-time welding.
  • TIG-205HF is an intelligent power supply system built with a sleek and modern design. The automatic selection function can automatically detect the input voltage and will adjust to the suitable conditions on its own. Additionally, you can easily manually adjust it in the range of 95V to 260V for specific requests. This machine is designed for demanding industrial work and construction, including simple tasks and chores around the house.
  • Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. At that extreme length, the machine can still work perfectly and flawlessly, ensuring that the work is efficiently completed. It is extremely suitable for difficult operations on construction sites, agricultural sites, relatively remote areas, and even suitable for simple tasks around the house or workshop.
  • TIG-205HF has a variety of safety protection functions, such as automatic voltage fluctuation compensation, over-heating protection, over-current protection, over-load protection, TIG torch gun safety protection, solenoid valve gas control, etc. The fan has an automatic temperature control function, which can make the machine run very quietly.
Bestseller No. 10
Amico MTS-205, MIG/Flux Cored Wire, Lift-TIG, Stick Arc DC Inverter Welder 3-IN-1 Combo Welding, 115V & 230V Dual Voltage.
  • MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.

Compare The Top 10 Amico 205 Welder

Amico 205 Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page