Aluminum Stud Welder

SaleBestseller No. 1
Solary 4200 Spot Welding Machine 4200A Car Dent Puller Dent Pulling Machine Spotter Welders
  • Equipped with suction slide hammer set for repairs of large dent areas without damaging the paint work
  • Dual-function welding contact tips with convenient earth connectors: weld washer ring and increase electricity current for heating at the same time
  • Voltage transformer made in copper enables high output voltage and heavy duty load
  • Widely adjustable welding current; Pre-programmed time setting during operation mode selection
  • Suitable for welding washers, special washers, wriggle wire, rivets, sheet patching, carbon rod heating and shrinking.
Bestseller No. 2
2020 Weldpro 200 Amp Inverter Multi Process Welder with Dual Voltage 220V/110V Mig/Tig/Arc Stick 3 in 1 welder/welding machine
  • Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding!
  • The model 200 is also capable of true lift TIG welding as well as stick welding and aluminum welding with the optional spool gun. The MIG 200 is an intuitive synergically designed MIG / Flux Core welding machine.
  • MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A; MMA: 40-200A; TIG: 15-200A115V: MIG:40-120A; MMA:40-120A; TIG: 15-120A; 30% at 200 Amp rated duty cycle.
  • MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in; TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4 in; MMA electrode Dia: 0.063-0.157 acid electrode, alkaline electrode, welding thickness: 14ga-0.315in
  • Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings.
Bestseller No. 3
Mophorn Capacitor Discharge Welding Torch 13FT 4M, Stud Welding Gun Portable, Spot Welding Torch Stud Welder Gun for Welding of Metallic Materials, Aluminum, Brass, Copper, Steel
  • 【DURABLE WELDING NOZZLE】- Welding nozzle is durable due to the heat-resisting materials.
  • 【4M FLEXIBLE CABLE】- The capacitor discharge welder adopts a 4-meter high-quality flexible cable for more convenience.
  • 【ERGONOMIC HANDLE】- Ergonomically designed handle fits the palm, raised stripes pattern, comfortable to grasp and it is non-slip.
  • 【EASY TO USE】- The welding torch is compact and portable and it is also easy to install different collets.
  • 【WIDE APPLICATION】- Mainly used for the welding of metallic materials such as aluminum, brass, copper, steel, etc.
Bestseller No. 4
SOLARY SA01 Aluminum Weld Stud, Weld Studs, CD Type Weld Stud, Capacitor Discharge (CD) Stud
  • Appartus for aluminum stud -Raw Material:Copper. -Length:65mm.
  • Aluminum stud connector -Raw Material:Aluminum . -Length:60mm.
  • Aluminum stud -Raw Material:Aluminum . -Length:15mm.
  • Dent pulling hook -Raw Material:iron. -Length:77mm. -Weight:about 41g.
  • Welding Extractor -Raw Material:Copper. -Size:L50*W50mm. -Weight:about 60g.
Bestseller No. 5
Capacitor Discharge (CD) Stud Welder 1/4" Max Unit- CDi 502 German Made
  • Maximum Welding Rates
  • 1/4" Max Unit
  • Free Accessory Kit & Studs
  • Portable and Easy to use
  • Great for all skills of welding
Bestseller No. 6
Ting Ao 86PCS Truck SUV Stud Welder Dent Puller Spot Welding Pulling System Repair Tools Kit Rods Holder Slide Hammer
  • 【Product contents】 Spot welding gun 1pc.Spot welding gun switches 3pcs. Dent pulling claw 7 finger 1pc.Washer holder 1pc.Dent pulling straight bits 50pcs.Dent pulling star pads 10pcs
  • 【Description】Dent pulling slide hammer 1pc. 1-Raw Material:stainless steel. 2-Length:40cm. 3-Diameter:M16. 4-Weight:1.72kg Dent pulling hook 1pc. 5-Raw Material:stainless steel. 6-Size:M16. 7-Length:13cm. 8-Weight:about 110gr. Spot welding tip double sided 1pc. 1-Raw Material:Copper. 2-Sharp$flat tip
  • 【Detail】Graphite rods holder 1pc. 1-Raw Material:graphite. 2-Length:355mm. 3-Diameter:8mm. 4-Working current:400A.Wiggle wires 10pcs. 9-Raw Material:Copper. 10-Length:335mm.11-Diameter:2mm.12-Weight per piece:12gr
  • 【Feature】Star pull pads holder 1pc.1-Raw Material:Copper coated steel. 2-Thickness:1.5mm to 2mm. 3-Hole Diameter:10mm. Graphite rods 5pcs.1-Raw Material:Copper. 2-Length:65mm. 3-Hole Dia:10mm
  • The product does not include the power cord, as shown in the figure
Bestseller No. 7
Portable Studwelder Kit,Stud Welding Torch Stud Welding Machine Stud Machine Welder 13ft (4m) 1—3m/s,for Welding of Metallic Materials, Aluminum, Brass, Copper, Steel
  • 【Durable welding tip】The welding tip is durable due to the use of heat-resistant materials. Long service life.
  • 【Weldable Materials】 This product is used on Energy storage/ capacitor Discharge stud welding machine. Carbon steel, stainless steel, aluminum and brass, copper, chromium zirconium copper.
  • 【4M Standard Length】The stud welding machine uses 4 meters of high-quality flexible cable, which is more convenient.
  • 【Welding Time】1—3m/s. Input voltage: 100—240v. Work voltage: 40—200v. Standard length: 4m. Welding range: 2—10mm. Gross Weight: 2.7kg.
  • 【After-sale Guarantee】If you have any questions after receiving the product, please contact me in time and we will handle it immediately. We are committed to all after-sales so that buyers can better receive satisfactory services.
Bestseller No. 8
H & S Autoshot 4550 Starter Plus Stud Welder Kit
  • Fit Type: Universal
  • Built in overload protection
  • Exclusive stud ease technology
  • Upgraded 1016 T handle slide hammer
Bestseller No. 9
Motor Guard JO1050 Magna-Spot Entry-Plus Studwelder Kit
  • Entry-Plus Kit contains a 1500 series stud welder, heavy-duty slide hammer, electrode for pins, 250 - 2.0mm pins in a handy storage carton
  • 120 VAC 1 PH 50/60 Hz 15 A
  • 9 foot heavy gauge oil resistant power cord
  • Five-Year limited warranty
  • Made in USA
Bestseller No. 10
LOTOS MIG175 175AMP Mig Welder with Free Spool Gun, Mask, Aluminum Welding Wires, Solid Wires, Argon Regulator, Standard MIG Gun
  • Aluminum Wire Feeder--The durable high quality aluminum wire feeder offers a much more stable and better welding experience.
  • Spool Gun Include-- High-speed MIG spool gun for aluminum welding, 10 feet 4 inches long, 4-prong end connection, 1lb aluminum wire with dia. 0. 9 millimeter included. Can welder 3/16" or thinner aluminum plate.
  • Reliable and Durable-- Its transformer technology has been proven to be reliable and durable.
  • Rated Output--175-amp MIG welder; mild/stainless steel: 18 Gauge – 1/4"; Aluminum: 3/16" or Thinner. Input voltage: 220/240V AC.
  • Multi Use--Welding stainless steel, mild steel, aluminum (with a spool gun, already include in the package, no need to purchase separate) and other metal materials.

Compare The Top 10 Aluminum Stud Welder

Aluminum Stud Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to gets small percentage of comission from Amazon if you purchase from page