Ac/Dc Welder Hobart

SaleBestseller No. 1
Hobart 500551 EZ-TIG 165i AC/DC TIG Welder 230V
  • Easy-to-Use Interface | All you need to do is power it up, select your material, and set the material thickness range
  • Welder Dimensions – 9.87” W x 23.87” L x 17” H | Input Voltage – 220/230/240 V 60 Hz | Material Thickness – Steel: 22.00 ga. - 3/16 in. | Amperage Min/Max – 10/165 A | Torch – WP-17, 12.5 ft. long | Tungsten – Set up 3/32 | Plug – 30 amp
  • HF start to allow for a non-contact arc start to eliminate tungsten and material contamination
  • Infinite Amperage Control provides broader operating range with finer control. High frequency starts
  • Fan-On-Demand feature allows the fan to run only when needed, reducing dust/debris pulled into the unit
Bestseller No. 2
Hobart 500570 Stickmate 160i
  • Dependable, reliable and rugged
  • Easy to carry & store. Weighs under 20 lbs; 10 ft. (3 m) electrode cable with heavy- duty holder; 10 ft. (3 m) work cable with clamp ; 6.5 ft. (2 m) power cord with MVP adapters for 120V and 240V .
  • Easy, quick, reliable starts with hot start technology
  • Up to 160A output. Welds up to 5/32 inch mild steel
  • 120V/240V input power. Allows connection to 120 or 240V receptacles without tools
Bestseller No. 3
Hobart 500571 Stickmate 210i
  • Dependable, reliable and rugged
  • Easy to carry & store. Weighs under 20 lbs
  • Easy, quick, reliable starts with hot start technology
  • Up to 210A output. Welds up to 5/32 inch mild steel
  • 240V input power
Bestseller No. 4
Hobart Champion Elite Arc Welder/Generator with 725CC Kohler Gas Engine and Electric Start - 40-225 Amp DC Output, 11,000 Watt AC Power, Model Number 500562
  • Mobile source heavy-duty generator/welder
  • 41in.L x 20in.W x 28in.H unit is just under 4ft. long and weighs less than most competitive units
  • Portable, engine-driven solution with 23 HP Kohler twin cylinder, 4-cycle OHV engine
  • Delivers up to 11,000 Watts of AC generator power to run tools, worklights or backup power during an outage
  • 9,500 continuous watts power generation
Bestseller No. 5
Hobart 500544 Champion Elite 11,000 Watt Generator/225 Amp AC, 210 Amp DC Stick Welder With 23 HP Kohler 4-Cycle Engine
  • Four 120 volt (20 amp), one 240V (50 amp), and one 120/240 volt (50 amp) receptacles with push-button reset
  • Auxiliary power while welding provides the capability to run other equipment (lights, grinder) at the same time
  • Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections
  • Auto-idle for greater fuel savings and reduced noise
  • No tools oil change and standard hour meter to help maintain routine scheduled oil servicing
Bestseller No. 6
Hobart 500536 Ironman 230 MIG Welder With Wheel Kit & Cylinder Rack
  • Delivers 30-250 amps of pure power in a heavy duty machine
  • The arc of the IronMan 230 is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
  • Welds 24 gauge up to 1/2 inch material in a single pass
  • Twelve-tap voltage control allows for a smooth easy-to-control arc
  • Add the optional Hobart DP-3545-20 spool gun and you’re ready to weld aluminum from 18 ga to 1/2 in.
Bestseller No. 7
Hobart 500559 Handler 140 MIG Welder 115V
  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses
  • Welds 24 gauge up to 1/4 in mild steel; Weldable Materials: Steel, Stainless Steel and Aluminum
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW)
  • Operates off 115V standard household current; Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load
  • Welding Amperage Range: 25-140 A; 20% duty cycle @ 90 Amps, 19V
Bestseller No. 8
Hobart 500421 Stickmate LX 235 AC Stick (SMAW) Arc Welding Power Source
  • 235 amp AC output
  • 160 amp DC output
  • 15 ft electrode cable
  • 10 ft work cable
  • Easy arc starts
SaleBestseller No. 9
Hobart - 500553 Handler 210 MVP MIG Welder,Small
  • Your purchase includes One Hobart – 500553 Handler 210 MVP MIG Welder, One 10 ft. (3m) H100S4-10 gun, One 10 ft. (3m) work cable with clamp, Built-in gas solenoid value and dual-gauge regulator with gas hose
  • Welder Dimensions: 10.62” W x 19.5” L x 12.37” H | Welder weight: 79 lbs. | Input Voltage: 110/115/120 V – 220/230/240 V | Material Thickness: 1/4” – 3/8”
  • Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel
  • Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe
  • Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
SaleBestseller No. 10
Hobart 770460 6011 Stick, 1/8-10lbs
  • Country of Origin:China
  • Package length:14.5"
  • Package width:4.25"
  • Package height:2.75"

Compare The Top 10 Ac/Dc Welder Hobart

Ac/Dc Welder Hobart is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page