3D Printer Filament Joiner Welder

Bestseller No. 1
ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H), Black
  • 【Great starter 3D Printer】: Super easy to setup since it comes almost entirely preassembled, come with all the proper tools to get started, and just a single grub screw to level instead of having to level each corner. Great introduction to 3D printing.
  • 【With the Dual Rails】: No worry about Z wobble issue; The dual Z axis rail make the bed very stable, this helps with the movement and to make sure the bed does not shift in the middle of printing; Better choice for large x-y objects with super-fine details.
  • 【Upgraded LED Array】: With the UV upgraded lighting, it makes the resolution and the accuracy in your printing that much better and tighter than any other 3d printer in its class. The pitting in the skin, the hair and the texture in the clothing all can shows up.
  • 【More Function】: Touch screen: offer a new-Level use experience Sanded Aluminum platform: greatly enhance adhesion make it more stable during printing Double air filtration system: effectively reduce the divergence of odor CE Certified Power Supply
  • 【Photon Owner's Group】:On Facebook as the people there are very knowledgeable and love to help with issues; They are eager to give suggestions and advice for everyone to get the best of their Photon and photon S.
Bestseller No. 2
Plasma Cutter, 50A Inverter AC-DC IGBT Dual Voltage (110/220V) Cut50 Portable Cutting Welding Machine With Intelligent Digital Display With Free Accessories Easy Cutter Welder(Orange)
  • Portablet plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; Better cutting quality and longer consumable life.
  • 50 Amp 80% Digital Inverter Air Plasma Cutter,Smart wide voltage 90~260V, 50/60Hz(With Converter Power Cord) 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • PACKAGE INCLUDES: 1pcs xPower supply(1.8M),1pcs x Converter Power Cord(0.53M),1pcsx(4M) Plasma cutting torch, 1pcs xground clamp(2.5M), and Air filter regulator, consumables, Instruction Manual, etc. ( 4pcs x stainless steel 1pcs x Gas tube 4pcs x Hoop 3pcs x Plasma Tips Nozzle Extended 3pcs x Electrode- Extended 4pcs x Shroud Ceramic Cup 2pcs x Gas Ring)
  • Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).Long term supply of consumables on S7 shop.
  • BUY WITH CONFIDENCE: We offer 30 days refund and 3-years warranty, please submit registration form on our website.Soudeur soldador.
Bestseller No. 3
ANYCUBIC Mega-S New Upgrade 3D Printer with High Quality Extruder and Suspended Filament Rack + Free Test PLA Filament, Works with TPU/PLA/ABS
  • ※ Works Out of the Box:3 steps to set up the printer with fix 8 screws within minutes not only to an expert user but also to beginner.
  • ※ Updated Extruder: Taitan extruder with its solid filament drive and overall mechanical design compatible with most filaments, reduced the clogging risk and improve printing accuracy. You could easily adjust the extruder refer the adjusting angle logo.
  • ※ Anycubic Ultrabase:Patented printing platform with excellent adhesion whilst printing and pop off like they were never attached to the bed once it cools down. We not only upgrade the platform plate but also improve quality of the wires that won't be loose.
  • ※ Filament Sensor & Large Built Volume:The sensor pause prints and set off an alarm when you run out of filament which saves time and cost , printing volume reach 8.27 x 8.27 x 8.07 inch
  • ※ Technical Support: We provide one year after-sale service for printer and lifetime technical assistance and 24H response. There also has a growing user community to sharing their successes and trials on Facebook, Reddit, and Youtube, which very helpful to beginners even seasoned users. Warning: Please download the latest firmware on ANYCUBIC official website for thermal protection.
Bestseller No. 4
eastar Filament Welder Connector Fit for 3D Printer PLA ABS Sensor Ender 3 Pro SKR 1.75mm
  • Made of high quality Metal, durable for use.
  • Suitable for Most of 3D printer filament.
  • You can connect Broken Filament.
  • Easy to use, convennient for your life.
  • Stable characteristics, high reliability.
Bestseller No. 5
ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and Free 1kg PLA Filament, Build Size 300X300X305mm
  • 【Fast Assembly】: Mega X 3D printer came in two modules and all it takes is to plug in 12 screws and 3 cables; easy to assemble and get printing right out of the box; Perfect choice for beginners and veteran.
  • 【High Print Precision】: This 3D Printer’s print precision is greatly improved by equipping it with Y Axis Dual Sideway Design and Z-axis dual screw rod design. The pitting in the skin and texture in the clothing all can shows up.
  • 【Large Build Volume】: This FDM printer comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • 【Patented Heat Bed】: No hassle of sticker any more; Ultrabase bed surface coated with patented microporous coating, allowing the print holds strong when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print. Kindly note: The bed will not go over 90 degree.
  • 【More Function】 Resume Print: One click to resume from the last recorded position when suffered power outages.TFT Touch Screen: As responsive as operating on the phone Meanwell Power Supply: Compliance with UL60950-1, enhance the safety performance All ANYCUBIC 3D printers backed with lifetime technical support
Bestseller No. 6
Festool 574432 Domino Joiner DF 500 Q Set
  • NOTE: The DF 500 only come with the 5MM cutter which is installed.
  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
  • Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
  • Indexing pins for quick alignment against the edge of the workpiece for accurate placement. Hose port diameter: 1.06 inch
SaleBestseller No. 7
DEWALT Plate Joiner Kit, 6.5-Amp (DW682K)
  • 6.5 Amp, 10,000 rpm motor provides power for working in the hardest woods
  • Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
  • Integral one-piece fence is adjustable and tilts 0-90 degrees
  • Flush cuts can be made at 0 degrees without removing fence
  • 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint; non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work
SaleBestseller No. 8
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
  • NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33"; NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set
  • OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
Bestseller No. 9
REXBETI Wood Biscuit Plate Joiner Kit with 4 Inch Tungsten Carbide Tipped Blade and 100pcs Wood Connecting Plates, Adjustable Fence and Angle Knob for Precise Positioning, Suitable for All Wood Type
  • EASY TO USE - 10,000 rpm motor provides power for working in various types of harder wood. The pre-set depth ( biscuit size: #20, #10, #0 and M ) helps you to cuts slots for multiple biscuit sizes. It's easy to quickly set the fence angle and height and provide smooth cuts is an ideal tool for woodworker beginner
  • ADJUSTABLE FENCE AND ANGLE KNOB - REXBETI biscuit joiner has three adjustable fence positions at 0, 45 and 90 degrees to make quick, accurate biscuit cuts for easily joining mitered pieces.The angle knob allows you to adjust the fence angle and helps you to tackle edge-to-edge, end-to-edge and miter-to-miter
  • 4 INCH CARBIDE-TIPPED BLADE AND 100pcs BISCUITS - All 100mm(4 inch) in diameter with a 22mm bore biscuit joiner blades can be used for REX031.And the package comes with 1 x 4 inch carbide-tipped blade and 100pcs packed individually biscuits
  • DUST COLLECTION BAG - Dust extractable design provides easy clean-up and an unobstructed view when in use. Clean slots holes for better glue adhesion and longer cutter life
  • ABOUT REXBETI - REXBETI wood Biscuit Plate Joiner Kit is great for you to do DIY
Bestseller No. 10
Festool 574447 XL DF 700 Domino Joiner Set
  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels
  • Indexing pins for quick alignment against the edge of the work piece for accurate placement
  • Tenons up to approximately 5-1/2-Inch in length for large scale projects
  • Includes optional trim and cross stops for narrow stock and edge joining.Power Consumption:420 watts

Compare The Top 10 3D Printer Filament Joiner Welder

3D Printer Filament Joiner Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page