3 And One Welder

SaleBestseller No. 1
Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown
  • PLASMA CUTTER--50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum;
  • TIG WELDER: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal NOT Included). STICK/MMA WELDER--15-200AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for We
  • SETUP WITHIN 1 MIN--The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • THE COMPATIBLE CONSUMABLES SETS for this BROWN Color CT520D Plasma Cutter are "LCS22" or "LCS33". Please search "Loots LCS22" or "Loots LCS33"; NOT compatible with Loots LCON20, LCON40 or LCON90 Consumables Sets or any other third part consumables set
  • BUY WITH CONFIDENCE--We offer 30 days refund and 1-year free warranty, please submit registration form on our website.
Bestseller No. 2
CTS-160, 30A Plasma Cutter, 160A TIG-Torch, 140A Stick Arc Welder 3-in-1 Combo Welding (CTS-160)
  • Combo 3-in-1 multifunction Plasma Cutter/TIG Torch/Stick Arc professional welding machine.
  • Advanced IGBT technology, synergic controlled, very easy and simple operation.
  • Featured wave-form control system: perfect wave form of volts and amps during, short circuits and Arc burning cycles.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection.
  • Automatic temperature control, fan dormancy, steeples amperage control, all generators friendly.
SaleBestseller No. 3
Forney 324 MIG/Stick/TIG 3-in-one 190-Amp Welder, 120/230-Volt, Green
  • MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and TIG Welder (Accessories for TIG Welding not included) everything you need in one machine
  • EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly
  • CONTROL YOUR WELD- Move at the right speed that fits your need, the flow meter supplies a correct regulation of gas using a single stage piston
  • RUGGED- All metal case, built to take the day to day only using a voltage of 115 (15 amps) or 220 (50 amps)
  • WELDER INCLUDES- Stick and MIG set-up. Along with a flow meter and gas hose
Bestseller No. 4
HITBOX MIG Welder 200Amp Inverter MIG ARC Lift TIG Gas Gasless 4 in 1 Multifunction MIG Welding Mahcine 220V Flux Cored Wire Solid Core Wire Welding Equipment
  • MULTI FUNCTION MIG WELDER 200A with MIG/ARC/LIFT TIG gas gasless multi Function 220V DC inverter welder
  • GAS&GASLESS AVAILABLE 1kg/ 5kg 0.8-1.0mm solid wire with gas welding iron; 0.8-1.0mm flux-cored wire without gas welding carbon steel and stainless steel
  • GREAT DESIGN Simple design, beautiful, small size, light weight, easy to carry.
  • ACCESSARIES INCLUDING MB15 MIG gun, earth clamp, electrode holer, gas tube, 1kg 1.0/0.8mm flux-cored wire and portable plug, ready to use!
  • 1 YEAR WARRANTY - HITBOX MIG200 welder offers good warranty. If you meet any problem when using this machine, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence
Bestseller No. 5
MIG Welder 125A Gas and Gasless Welding, AC 220V IGBT Inverter MIG/Stick/TIG Welder 3 in 1 Flux Core/Solid Wire MIG Welding Machine
  • No gas required, portable Lightweight and compact design for 18bls and easy to use with high effect to instead of stick welder.
  • 1kg flux cored wire most perfectly to do the Steel welding without gas.solid welding wires .030"-.035"(0.8/1.0 mm )to weld over .030"(0.8mm)Thickness workpiece.
  • You can wire feed speed control so you can dial in the perfect weld,adjust it to suit your application and weld with different thicknesses, 30A breaker suggested for 220V.
  • MIG/MMA ,Gas/Gasless All are available ,MMA Welding(3.2mm Rod) 7018 1/8″ very well, also 6013 and 7018 3/32″.Perfect entry level welder!
  • Great for DIY Users for outdoor repairs, rusty metal, farm & road equipment and maintenance & repair, Suitable for welding stainless steel, mild steel, and other metal materials.
Bestseller No. 6
HITBOX 50 AMP Air Plasma Cutter, 210 AMP HF TIG Pulse and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine with Air Regulator (Model: CT520)
  • 【3 in 1 MMA/TIG/CUT Function】This digital plasma cutter offers a multipurpose unit that provides a variety of welding and cutting functions.Used as a 210A TIG welder, 50A air cutting machine or 210A ARC MMA stick welder.
  • 【50 AMP Air Plasma Cutter】10 - 50 Amp DC output, 1/2 inch(12mm) ideal clean-cut under 220V, simple operation and smooth cutting surface. Uses non-hazardous compressed air to cut, safe and at low cost.
  • 【HF / Pulse TIG & 2T / 4T Function】Digital control precise welding, HF start hand torch control with the digital control welding parameters setting. Suitable for precise welding stainless steel, mild steel and other metal materials.2T is suitable for the re-tack welding,4T is suitable for welding medium thickness plates.
  • 【With Air Regulator & Air Pressure Indicator】 With high impact air regulator knob, accurate air pressure regulation between 1 and 150-psi.Easy to operate and save your money.
  • 【Cuts Almost Any Metal】This air cutting machine is suitable for most metals, such as stainless steel, aluminum, titanium, cobalt, nickel alloys, copper magnesium, cast iron etc. Can be widely used at automotive, metal processing, manufacture, site work etc.
Bestseller No. 7
Plasma Cutter, HeroCut Digital CAT520D Dual Voltage 110/220v HF Arc Starting Plasma/Tig/Stick Welder 3 in 1 Combo Inverter Welding Machine, 12mm Clean Cut, 16mm Servance Cut #50Amps 65PSI (CAT520D)
  • 【HF Plasma Cutter & TIG welder】, This machine is dual voltage 110/220V (120/240) with 10-50Amps output current under 220v (10-35Amps under 110V), Clean cutting thickness 12mm, Max severance cutting thickness is 16mm, Come with high quality torch. Work with compressed air to cut metal stainless steel, Alloy steel, Mild steel, Thin copper(1-4mm thick), Aluminum. Post time can adjust the post air for CUT from 2-8 seconds. Work with water separator can increase the cutting thickness.
  • 【TIG welding HF 50/60Hz】,This machine is HF TIG not lift TIG or scratch TIG, With current 15-200Amps for TIG mode under 220V (15-160Amps under 110V). High quality TIG torch easy weld stainless or steel, Easy work with foot-pedal (it is not included in standard accessories), Post time can adjust post gas for TIG from 2-8 seconds. Tungsten is not included in standard accessories. Please make tungsten head sharp before using TIG, Can get better welding in this way.
  • 【STICK/MMA/ARC welder】,Machine with Stick/MMA/ARC function. Output current 10-200Amps under 220V (15-140Amps under 110V), Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6 to #5.0
  • 【Post time adjustment for TIG and CUT】,This machine is Dual voltage 110/220V (120/240), It is auto indicate the voltage no need to switch voltage by handle. Post time can be adjust for TIG and CUT from 2-8 seconds. Air meter display can show the air pressure. This machine can work with pedal.
  • 【Full New Design With Digital Controller】, This is digital welder, lightweight and compact, Full new design IGBT inverter technology, the current can be adjust 15-50Amps for CUT under 220V, (15-35Amps under 110V), 15-200Amps for TIG/MMA under 220V, (15-160Amps for TIG and 15-140Amps for MMA under 110V), post time can be adjust for TIG/CUT from 2 to 8 seconds. Tungsten and pedal are not included in standard accessories. Circuit in machine auto indicate the voltage no need to switch by hand on ma
Bestseller No. 8
Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display
  • USE MOS TRANSISTORS: The powerful electric welding machine performs better than IGBT welding at a lower voltage, and performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine.
  • SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs.
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozzles, 2 x Electrodes, 1 x English manual.
  • QUALITY ASSURANCE: We will provide quality assurance for every product. In the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.
Bestseller No. 9
MIG Welder Flux Core Reboot Lift Tig MIG130 Gas/Gasless AC 220V Inverter MIG/Stick/TIG Welder 3 in 1 Flux Core/Solid Wire MIG Welding Machine MMA MIG MAG Newbie Welder
  • Look at the panel,it is easy to set the parameters. the mig130 supports with 1kg flux cored wire most perfectly to do the carbon steel welding without gas.mig/mma ,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
  • Using gas with 1kg solid welding wires .030"-.035"(0.8/1.0 mm )to weld over .030"(0.8mm) thickness workpiece. also supports gasless welding,portable design 18bls.【30A breaker suggested】
  • Lift tig mode is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
  • Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
  • Buy with confidence as Reboot offer 30-day 100% satisfaction or money back guarantee and 1-year limited warranty,there is a warranty card comes together in the package,please email us through that to get the consumables.click on the add to cart button now!
Bestseller No. 10
Plasma Cutter STICK TIG Welder - Tosense 3 in 1 Combo 50A Air Inverter Plasma Cutter 200A TIG STICK Welding Machine Dual Voltage110V/220V 520TSC
  • 【3 in 1 COMBO WELDING MACHINE 】- 50A plasma cutter, 200A TIG welder, and 200A STICK/MMA welder.
  • 【 TIG WELDER】10-200 A @ 220 V & 10-150 A @ 110 V DC TIG Electric Current Output, HF arc start hand torch control and 7Pin Precise Foot Pedal Welding Heat Control(Foot Pedal NOT Included),you may need buy :https://www.amazon.com/dp/B0776S9G1P?ref=myi_title_dp)
  • 【INVERTER PLASMA CUTTER】10-50Amp DC current output.The cutting machine offers a variety of welding and cutting abilities; max cutting thickness : 1/2” . Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • 【STICK/MMA/ARC WELDER】Output current: 10-200 A @ 220 V & 10-150 A @ 110 V, easy arc start, stable welding arc; deep weld pool and beautiful welding shape. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm.
  • 【MULTIPLE USES 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals; ideal for a welding enthusiast or hobbyist with basic repair needs and general light welding requirements ( Video: www.you tu be.com/watch?v=f7B5NxZFc9A)

Compare The Top 10 3 And One Welder

3 And One Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page