【3 in 1 MMA/TIG/CUT Function】This digital plasma cutter offers a multipurpose unit that provides a variety of welding and cutting functions.Used as a 210A TIG welder, 50A air cutting machine or 210A ARC MMA stick welder.
【50 AMP Air Plasma Cutter】10 - 50 Amp DC output, 1/2 inch(12mm) ideal clean-cut under 220V, simple operation and smooth cutting surface. Uses non-hazardous compressed air to cut, safe and at low cost.
【HF / Pulse TIG & 2T / 4T Function】Digital control precise welding, HF start hand torch control with the digital control welding parameters setting. Suitable for precise welding stainless steel, mild steel and other metal materials.2T is suitable for the re-tack welding,4T is suitable for welding medium thickness plates.
【With Air Regulator & Air Pressure Indicator】 With high impact air regulator knob, accurate air pressure regulation between 1 and 150-psi.Easy to operate and save your money.
【Cuts Almost Any Metal】This air cutting machine is suitable for most metals, such as stainless steel, aluminum, titanium, cobalt, nickel alloys, copper magnesium, cast iron etc. Can be widely used at automotive, metal processing, manufacture, site work etc.
【HF Plasma Cutter & TIG welder】, This machine is dual voltage 110/220V (120/240) with 10-50Amps output current under 220v (10-35Amps under 110V), Clean cutting thickness 12mm, Max severance cutting thickness is 16mm, Come with high quality torch. Work with compressed air to cut metal stainless steel, Alloy steel, Mild steel, Thin copper(1-4mm thick), Aluminum. Post time can adjust the post air for CUT from 2-8 seconds. Work with water separator can increase the cutting thickness.
【TIG welding HF 50/60Hz】,This machine is HF TIG not lift TIG or scratch TIG, With current 15-200Amps for TIG mode under 220V (15-160Amps under 110V). High quality TIG torch easy weld stainless or steel, Easy work with foot-pedal (it is not included in standard accessories), Post time can adjust post gas for TIG from 2-8 seconds. Tungsten is not included in standard accessories. Please make tungsten head sharp before using TIG, Can get better welding in this way.
【STICK/MMA/ARC welder】,Machine with Stick/MMA/ARC function. Output current 10-200Amps under 220V (15-140Amps under 110V), Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6 to #5.0
【Post time adjustment for TIG and CUT】,This machine is Dual voltage 110/220V (120/240), It is auto indicate the voltage no need to switch voltage by handle. Post time can be adjust for TIG and CUT from 2-8 seconds. Air meter display can show the air pressure. This machine can work with pedal.
【Full New Design With Digital Controller】, This is digital welder, lightweight and compact, Full new design IGBT inverter technology, the current can be adjust 15-50Amps for CUT under 220V, (15-35Amps under 110V), 15-200Amps for TIG/MMA under 220V, (15-160Amps for TIG and 15-140Amps for MMA under 110V), post time can be adjust for TIG/CUT from 2 to 8 seconds. Tungsten and pedal are not included in standard accessories. Circuit in machine auto indicate the voltage no need to switch by hand on ma
IGBT INVERTER - Built by the latest IGBT inverter technology, the 120/240V dual voltage plasma cutter is designed to produce 10-45A adjustable output power with a 60% duty cycle.
BUILT IN PROTECTION - With a built-in over-heat protection and insulation class F it ensures safe operation with higher heat tolerance and voltage capacity. The included air regulator controls the air pressure at 75psi. Air compressor is not included.
3-IN-1 COMBO - This portable plasma cutter/welder comes with a PT-31 cutting torch, TIG-17 torch for tig welding, and stick holder for up to 5mm welding rod. You also get earth clamp, power cable, air hose, and torch consumables.
1/2” CLEAN CUT - Hyperikon’s Trifecta plasma cutter will cut any aluminum or mild steel work piece of up to 14mm thickness. For smooth cutting and minimal dross build-up adjust the amperage and cutting speed according to the work piece.
3 YEAR WARRANTY - Hyperikon's 3-year warranty means we've got you covered! Contact us for an easy and fast replacement.
MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function.
Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, automatic control gas solenoid valve has been installed inside the machine.
Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Synergic Control,Automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses
IGBT inverter technology, Full 30-205Amp(max) with digital display, reliable quality and stable performance
The MIG-205DS is capable of true lift TIG(need buy extra tig lift torch,not included inside product) welding as well as stick welding ,The MIG-205DS is an intuitive synergically designed MIG/MAG/ Flux Core/ARC/Lift TIG welding machine.
Safety, Automatic Protection Function for Over-current, Over-voltage and Over-heating
NON-TOUCH PLASMA CUTTER: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
TIG WELDER: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal NOT Included).
STICK/MMA WELDER: 15-200AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.
THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33".
It CANNOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set
3 And 1 Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page