240 Volt Mig Welder

Bestseller No. 1
Amico MTS-185 Amp MIG/TIG/Stick Arc DC Welder, Weld Aluminum(MIG) 120/240V Dual Voltage Welding New …
  • MTS-185 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 3/8" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron.It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 2
Eastwood MP250I Welder 120/240V MIG TIG Arc/Stick Weld Stainless Normal Steel
  • You Need To Buy Both Parts: WELDER and ACCESSORIES So You Can Have The Full Tool!
  • Welds steel and stainless And Operates on either 120v or 240v
  • Welds aluminum, with optional spool gun - #20172 Spool Gun
  • Welds thin sheet metal or up to ½ inch steel plate
  • Can also be used for Flux-Core welding
Bestseller No. 3
SUNGOLDPOWER MIG Welder 140A Gas and Gasless Welding 110/220V Dual Voltage IGBT DC Inverter Welding Machine Including Flux Cored Wire
  • 1.Multifunction:110V/220V Dual Voltage DC IGBT Inverter MIG 140A welder
  • 2.Gasless flux-cored welding and Gas-shielded MIG welding are available for the machine
  • 3.0.023''-0.039'' Flux Cored Wire and Solid Core Wire. Suit for 2lb and 10lb wire spool
  • 4.MIG140 welder has adjustable wire feed speed and welding current, you can adjust it to suit your application and weld with different thicknesses
  • 5.Ideal for outdoor repairs, rusty metal, farm & road equipment and maintenance & repair, Suitable for welding stainless steel, mild steel, and other metal materials.
SaleBestseller No. 4
Lincoln Electric K2185-1 Handy MIG Welder
  • Enjoy of a compact, portable and lightweight wire feed welder that is user friendly | Shielding gas sold separately
  • Welder dimensions – 12.8” H x 8.8” W x 18” D | Welds up to – 1/8 in. mild steel | Power cord length – 6ft. | Cored Wire Size Range – .035 | Voltage – 115V, 20 Amp
  • Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed
  • Great for home repair and hobby projects on light gauge mild steel found around most households
  • Four voltage settings and continuous wire feed speed adjustment allow you to weld mild steel from 24 gauge to 1/8" thick
Bestseller No. 5
Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable
  • The New Mig 155 GD is perhaps the most capable and versatile MIG welder in its class. Equipped with features designed to meet even the most demanding welding jobs while not breaking the bank. The 155 GD can perform MIG, flux core and DC stick welding as well as the ability to adapt scratch TIG with the optional TIG torch available through our website.
  • This latest version of our economy minded 155 amp MIG welder now includes the ability to remove the torch cable and replace it with our aluminum spool gun. After inserting the spool gun a simple flick of the switch inside the welders drive roller housing enables spool gun operation.
  • The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine.
  • Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs.
  • Portable, capable and versatile, still with the ability to run 120V as well as 240V this little powerhouse is tough to beat. PDF product manual is also available on the Weldpro website.
Bestseller No. 6
JEGS 81541 MIG/MMA 180 Welder 220V AC
  • 220V...
  • 28...
  • Wire: 7.87 in. Reel x 0.030 in.-0.035...
  • Duty Cycle: 25% @ 180A/60% @...
  • Gas...
Bestseller No. 7
Miller 951766 Millermatic 255 MIG/Pulsed MIG Welder w/EZ-Latch Running Gear- 208/240V
  • Pulsed MIG welding delivers higher quality Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
  • Easy-to-understand interface 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
  • Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
  • Program mode allows easy save and recall of favorite weld settings Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
  • EZ-Latch running gear Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
Bestseller No. 8
Reboot MIG Welder Flux Core 220V MIG160 Digital Gas/Gasless Inverter MIG/Stick/Lift TIG Welder Supports 2LB/10LB Flux Core/Solid Wire MIG Lift Tig Welding Machine EASY OPERATION
  • This digital mig160 welder supports 2lbs/10lbs flux cored wire most perfectly to do the carbon steel welding without gas.rated duty cycle : 60% at 160a and 100% at 120a.Just select the correct parameters instead of setting from the panel. 【30A breaker suggested】
  • Using gas with 2lbs/10lbs solid welding wires .030"-.035”(0.8/1.0 mm )to weld .030"above thickness workpiece.Multi-mode of mig/mma/lift tig,just select the mode you need on the panel.(tig torch is not included,find it in our store,named wp17fv)
  • Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
  • Lift tig mode(not HF tig) is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
  • Buy with confidence as reboot offer 30-day 100% satisfaction or money back guarantee and 1-year limited warranty,there is a warranty card comes together in the package,please email us through that to get the consumables.Click on the add to cart button now!
SaleBestseller No. 9
Hobart 500554 Handler 190 MIG Welder 230V
  • Your purchase includes – 10 ft. HR-100 gun | 10 ft. work cable with clamp | .030” contact tips | Power cord with plug | Welding guide and material thickness gauge | Owner’s manual with installation, operation and maintenance guidelines
  • Specifications: Input voltage – 230V 60Hz | Amp range – 25-190 amps | Duty cycle – 30% at 130 amps | Mild Steel thickness range – 24 ga. 5-/16” | Spool radio diameter inner/outer – .62”/1.95” | Max spool capacity – 11 lbs. | Power cord length – 6 ft.
  • 7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter
  • You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional
  • Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire | Protects power transformer from thermal overload to provide you maximum reliability
Bestseller No. 10
Miller 907734 Millermatic 255 MIG/Pulsed MIG Welder - 208/240V
  • Pulsed MIG welding delivers higher quality Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
  • Easy-to-understand interface 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
  • Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
  • Versatility Capabilities include MIG, pulsed MIG and flux-cored welding.
  • MDX-250 MIG Gun w/ AccuLock S consumables AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock S contact tips provide superior Spray and Pulsed MIG arc performance.

Compare The Top 10 240 Volt Mig Welder

240 Volt Mig Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page