18650 Spot Welder

Bestseller No. 1
7 Pcs Spot Welder,Welding Pen Portable DIY Mini Spot Welder Machine with Nickel Sheet 18650 Battery Spot Welder Kit 5 Gears Adjustable with A Charging Cable Third Generation
  • Product Function: The welding machine uses a single chip to precisely control the output current of the MOS tube, and generates a high temperature of more than 2000 degrees at the welding point to make the nickel sheet weld firmly. The welding machine itself has overcurrent protection, low voltage protection, overvoltage protection, and overtemperature protection. And other functions. Intelligent output current. Can guarantee safe use.
  • Lithium battery protection: charging to 4.2V can prevent battery expansion
  • Low-voltage protection: When the power lithium battery is working, the protection strategy of the lithium battery lower than 3.2V 5.5AH is adopted to give low-voltage space and security
  • Low Power Consumption Function: long press to turn on/off, short press to cycle to switch 5 gears, all operations can be quickly and conveniently performed, when it is off, it can be standby for up to one year due to low power efficiency
  • Thermal Optimization: This product uses two ultra-high rate model airplane lithium batteries, the discharge peak value can reach 630A+, all high-current circuit layouts, use infrared thermal imaging to optimize the design, and better share the discharge current
Bestseller No. 2
DIY Mini Spot Welder Machine, 18650 Battery Various Welding Power Supplies for Super Capcitor
  • Wide selection of welding power supply: lithium battery power supply or 12V car battery.The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
  • With LCD display screen, can display welding parameters.The welding pen and the input line are connected by U-shaped cold-pressed terminals, which is convenient for disassembly and replacement.
  • Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.The power board uses 2 Gusi copper to increase the overcurrent capacity.
  • using 5 300A MOS tubes, non-disassembled MOS tubes.The MOS tube driver adopts the imported special chip driver. The fastest MOS tube can be hit with 20nS. The switch is fast to prevent the explosion of the tube and the non-triode push-pull drive.
  • The MOS drive design adds a transient diode to protect the MOS and prevent the explosion of the tube.10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the overcurrent capacity.The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.12mm.
Bestseller No. 3
SUNKKO 737G+ Battery Spot Welder, Pulse Welding Machine for 18650 14500 Lithium Batteries Battery Pack Work With Nickel Strips 0.35mm
  • New panel design with intelligent welding function (only for welding pen), improve the efficiency of battery pack welding process;
  • Built-in temperature sensor, intelligent cooling system can automatically work according to machine's internal temperature;
  • Broad welding thickness range: 0.03 - 0.3 mm for fixed copper head; 0.03 - 0.2 mm for mobile welding pen, the welding thickness of pure nickel is between 0.03 and 0.15 mm;
  • Various welding methods optional, no welding limitation of battery pack's size;
  • Soldering function: the temperature of solder can be heat up to 300°C within 7 8 seconds, it's really efficient;
Bestseller No. 4
Mophorn 737G Pulse Spot Welder 0.15mm Battery Welding Machine 110V Battery Spot Welder and Soldering Station Portable Pulse Welding Machine for Battery Pack 18650 14500 Lithium Batteries
  • 【PUSH UP WELDING】- Fixed welding tips have LED light function for precise fixed welding. It is also called push up wekding mode which made for assemble small size battery pack.
  • 【PEDAL WELDING】- It you need precise spot weld, pedal welding is made for you. By controlling the foot pedal, precise location and timing you want is well served for you.
  • 【DISTINCT LCD PANEL】- It shows pulse quantity and current when you are at work with this machine. The distinct panel also allows you to set current and pulse easily and quickly.
  • 【EFFICIENT COOLING SYSTEM】- The radiator is 4100 rpm; with built-in smart chip to prevent overheating damage of the welder, automatic short-point protection, so as to prevent overheating of welding.
  • 【WIDE APPLICATION】- Suits for various sizes of battery pack, button battery, polymer battery and protection board, Apple mobile phone camera, stainless steel hardware, stainless steel mesh, etc.
Bestseller No. 5
SUNKKO 709A Battery Spot Welder Battery Welding Soldering Machine for 18650 Lithium-ion battery pack Welding 0.3mm Nickel Strip
  • USES: Welding lead/nickel sheets, wire mesh, Lithium-Ion cells, circuit boards, and soldering with a temperature ranging from 150 to 450 °C.
  • FEATURES: 2 ~ 18 welding pulses selection, fixed and spot welding capabilities, removable foot pedal, temperature regulation, current regulator, pressure regulated spot welding head.
  • MULTIPLE WELDING AND SOLDERING METHODS: Stationary spot welding with pin range of 5-6 mm and pressure 300-500g, attachable pen with minimum diameter 4 mm and maximum diameter 10 mm and no slip grip, attachable anti-static soldering pen.
  • Increase the welding current and the quantity of pulses can improve the welding performance when you are processing thicker nickel strip.
  • SHIPPING: The spot welder is sent from our Ohio or Nevada warehouse with an estimated shipping time of 2 ~ 4 business days, though expedited shipping is available. We will send you a tracking number after the item ships.
Bestseller No. 6
Handhold YaeCCC 737G Battery Spot Welder with Pulse & Current Display 1.5 kw
  • Use micro chip for controlling precision current to weld in precision.
  • There are wide range of selecting current(1/2 pulse) can be selected to make your work more convenient,safe and efficient.
  • Controlled by micro computer.
  • Welding power can be set and displayed on Led panel.
  • It is suitable for welding charging battery pack,button cell leads,hardware to process,etc.
Bestseller No. 7
SUNKKO Pulse Spot Welder 788H 18650 battery Welding Machine with LED Battery Testing and Charging Function
  • APPLICATION: suitable for welding 0.05 - 0.2 mm nickel plated steel strips (0.05 - 0.15 mm pure nickel strip); work with 18650, 14500 battery, etc;
  • FUNCTION: spot welding, battery testing and battery charging;
  • WELDING CONTROL METHOD: welding by pushing the welding head up or controlling by foot pedal;
  • SHIPPING: The spot welder is sent from our Ohio or Nevada warehouse with an estimated shipping time of 2 ~ 4 business days, though expedited shipping is available. We will send you a tracking number after the item ships.
Bestseller No. 8
Stark Professional Portable Spot Welder Machine Electric Welding Systems DIY Welding Tips with Carrying Handle 120-Volt
  • Single Phase Design - Easily weld together different types of materials with the single phase design. Simple welding mechanism allows you to quickly insert the materials and press to weld
  • Replacement Tips - Spot welder comes with extra pair of welding tips for multiple uses. Simply twist the tips off when they are ready to be replaced and screw on the new one
  • Durable Welding Tips - Welding tips are constructed from high quality steel to get the perfect weld for materials that have a thickness
  • Simple Lever Function - To perform welding applications, simply apply pressure and press down on the lever
  • Portable Design Machine - The attached handle allows you to quickly transport your spot welder to different job locations quickly
Bestseller No. 9
Sunkko 737U Battery Spot Welder Welding Machine for 18650 Lithium Batteries with Charging Function 0.2mm
  • APPLICATION: suitable for welding 0.05 - 0.2 mm nickel plated steel strips (0.05 - 0.15 mm pure nickel strip); work with 18650, 14500 and any other rechargeable lithium batteries; (Attention: The welding thickness also depends on the material of batteries’ poles, some batteries’ poles are made of iron or iron alloy, and some are made of stainless steel, generally, stainless steel is easier to weld than iron.)
  • WELDING METHOD: welding by pushing fixed head up, in this case, you need to adjust the pressure adjustor to make the spots more reliable and elegant.
  • WAYS TO IMPROVE WELDING PERFORMANCE: 1. adjusting welding current level; 2. adjusting pulse quantity. You may need to play with them a bit to get the best combination for your specific use.
  • ATTENTION: This spot welder can be used to weld pure nickel, nickel plated steel, nickel plated iron, iron and other alloys. It CANNOT weld metal like copper and aluminum.
Bestseller No. 10
CHENGBEI Portable DIY Mini Spot Welder Machine 18650 Battery Various Welding Power Supply
  • Wide selection of welding power supply: lithium battery power supply or 12V car battery.
  • The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
  • With LCD display screen, can display welding parameters.
  • The welding pen and the input line are connected by U-shaped cold-pressed terminals, which is convenient for disassembly and replacement.
  • Input line length: app.20cm/7.87in
    Length of welding pen: app.30cm/11.81in

Compare The Top 10 18650 Spot Welder

18650 Spot Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page