115V Arc Welder

Bestseller No. 1
Campbell Hausfeld 115V Stick Welder with Kit (WS099098AV)
  • Easy-to-use: portable welder has a transformer design that provides an easy-start smooth arc. Lightweight and portable design
  • High quality design: operates on standard 120V household current. Weld with 1/16-inch electrodes on a 15-Amp household circuit; a 20-amp circuit is required for welding with 5/64-inch electrodes
  • Ideal for novice or experienced welders. The unit interface features make it a snap for projects around the home or shop
  • Versitle features: weld mild and stainless steel from 18 gauge to 1/8 inch with two heat settings
  • Kit includes: one pair of welder gloves, hand held welding face shield, electrode starter pack, hammer/brush
Bestseller No. 2
Arc 110/220V Welder IGBT Smart MMA Stick DC Inverter 160a Welder with Digital LCD Display for Beginner Welding Machine Electrode Holder Ground Work Clamp Conversion Line Adapter Cable
  • 【Dual Voltage&Energy Saving】: The household smart welder is designed with dual voltage 110V/220V and saves energy up to 30%-70%, greatly improving the welding efficiency with low cost
  • 【IGBT Control&Easy to Use】: The mini DC arc welder is controlled by IGBT that ensures exact current, low splash and smooth joint. The arc welding machine is easy to operate even for entry level welder
  • 【Safety Protection&Portable Design Welder】: The welding machine is compact and lightweight, easy to carry around or put in storage for maintenance, repair, metal fabrication and other projects
  • 【Widely Used Welding】: The portable stick welder fits for 1.6-4.0mm rod for welding all kinds of ferrous metals such as carbon steel, medium carbon steel and alloy steel amongst others, perfect for whole day welding
  • 【Good After Sales Service】: If you don’t like this DC inverter arc welder,we promiss 45 days full refund Service. If quality issue occurs we promise replacement a new welder within 2 years
Bestseller No. 3
Arc Stick Welder, 115 Volt, 70 Amp (Campbell Hausfeld WS099001AV)
  • Durable metal welder with comfort fit handle for added convenience. Capable of welding 18ga up to 1/8” Material. Recommend using 1/16” and 5/64” welding rods.
  • Dual heat setting that runs great for both small repairs and hobby welding
  • Runs on standard 115V power and a duty cycle: 20% @ 50A. Weld and ground cable length: 6 feet
  • Thermal overload protection to prevent overheating, and transformer that provides an easy-starting, smooth arc
  • Finish your projects faster and easier with Campbell Hausfeld.
Bestseller No. 4
AUTOOL EMW-508 ARC-200 DC Inverter Welder, 20-160Amp IGBT Welding Machine Kit, AC 110V/220V Dual Voltages Portable Electric Welder
  • SMART IGBT CONTROL -- AUTOOL EWM-508 welder is controled by IGBT(Insulated Gate Bipolar Transistor), master current more exactly, low splash and smooth in weld joint, help us make a perfect welding.
  • HIGHT EFFICIENCY -- Pure copper core cable, current output stablely, loss little power even if transmit it in long distance. Compare with normal one, AUTOOL EWM-508 arc IGBT inverter welder save 70% power and its efficiency up to 85%.
  • FULL PROTECTION -- Automatic power-off protection for overheating. Thickening version aluminium alloy radiator designed in serrated, radiating in sectional type. 4100 turn/min mute fan for fast heat dissipation.
  • SAFE AND STABLE -- Digital chip control, arcing immediately. Built-in ultra low voltage intelligent regulator, started in unstable voltage area easily.
  • QUALITY WARRANTY -- We BELEY DIRECT provide 3year quality warranty. Premium after-sales service from high-quality product, we take full responsibility for our promise. Other fake store such as BOYU-SHITAI, we cannot guarantee!
Bestseller No. 5
Hobart 500559 Handler 140 MIG Welder 115V
  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses
  • Welds 24 gauge up to 1/4 in mild steel; Weldable Materials: Steel, Stainless Steel and Aluminum
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW)
  • Operates off 115V standard household current; Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load
  • Welding Amperage Range: 25-140 A; 20% duty cycle @ 90 Amps, 19V
Bestseller No. 6
Amico MTS-205, MIG/MAG/Flux Cored Wire, TIG Torch, Stick Arc Welder 3-IN-1 Combo Welding, 115V & 230V Dual Voltage.
  • MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
  • Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.
Bestseller No. 7
DEKOPRO 110/220V MMA Welder,160A ARC Welder Machine IGBT Digital Display LCD Hot Start Welder with Electrode Holder,Work Clamp, Input Power Adapter Cable and Brush
  • Advanced IGBT Inverter Technology:Powerful welder capable of welding mild steel, weld steel, stainless steel and cast iron. IGBT power device with unique control mode improves the reliability of welding machine
  • Portable Design:This welder features a easy carrying handle,compact design, easy for translation and storage. Very convenient, can be used anywhere you need
  • Leading Control Mode:Closed loop feedback control,the output voltage is stable,strong adaptability for electricity network
  • Energy Efficient:Reduce the damage of Copper and Iron,obviously increase the welding frequency,and energy-conserving result is remarkable
  • Multi Use: The MMA welder is suitable for welding stainless steel, mild steel, aluminum and other metal materials
SaleBestseller No. 8
Lincoln Electric K2185-1 Handy MIG Welder
  • Enjoy of a compact, portable and lightweight wire feed welder that is user friendly | Shielding gas sold separately
  • Welder dimensions – 12.8” H x 8.8” W x 18” D | Welds up to – 1/8 in. mild steel | Power cord length – 6ft. | Cored Wire Size Range – .035 | Voltage – 115V, 20 Amp
  • Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed
  • Great for home repair and hobby projects on light gauge mild steel found around most households
  • Four voltage settings and continuous wire feed speed adjustment allow you to weld mild steel from 24 gauge to 1/8" thick
Bestseller No. 9
Arc Union DC 210 amp Professional Dual Voltage Input IGBT Stick Welder Package 115v 230v
  • Best Selling Stick Welder in its Class
  • 210 Amps Max output
  • Dual Voltage 115v or 230v
  • Weighs under 15lbs
  • Industrial class welder
Bestseller No. 10
Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering
  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function; 5-160A comfortably welds thin stainless steel and other various metals.
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs.
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length.
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection.
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level; the strength of its components makes it a reliable work tool for professionals or individuals. Package includes 7 feet of power cord, 10 feet of 300-Amp electrode holder assembly, 10 feet of 300-Amp grounding clamp assembly, and a 230V to 115V power adapter.

Compare The Top 10 115V Arc Welder

115V Arc Welder is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.Therefore gets small percentage of comission from Amazon if you purchase from page